Please follow the Link below to be directed to our new Website



E-Mail Quotations

The way this works is that you draw up a draft of what it is that you would like including some basic measurements, and using this we will be able to send you a quote.
This process is a time saver for both you and us, and because of this you will benefit from the cost savings. All you need to do is draw up a draft, add some things listed below and await your reply.

Measurements and things to include are:

• Width
• Height
• Thickness
• And Radius’s if applicable
• Thickness of steel to be used (below there is a list of common sheet thicknesses)
• Grade of steel to be used (if you are unsure check out our page on Stainless Steel Grades or you can visit the Stainless Properties link)

Below is an example of how draft’s can be drawn up, this can be done on a drawing program, paint program, Microsoft program, CAD program, or even hand drawn and then E-Mailed.

This particular draft was done in CAD (Computer Aided Drawing) because I have access to a program but for the average person this can be drawn up any way possible and it is no problem if it doesn’t look perfect, as long as the measurements are accurate, the advantage of doing drafts in CAD programs are that once it is drawn you have a 3D model and the dimensions can be just plucked off of it when it is completed.

Common thicknesses for sheet metal are...

0.55 mm
0.7 mm
0.9 mm
1.2 mm
1.5 mm
1.6 mm
2.0 mm
2.5 mm
3.0 mm
4.0 mm
5.0 mm
6.0 mm
8.0 mm
10.0 mm

Upon receiving your draft document we will quote it and send you the quotation back via e-mail or if you prefer we can call you and have a chat about it.
When you are ready to send your draft to us you can either click our E-Mail Us link or send your e-mail to

Thank you